Hello,Welcome To The Website Of Dongguan Dalang Gallop General Machinery Business Department Website!
Home | Contact us | Chinese
Dongguan Dalang gallop general machinery Business department
Professional dryers and other vendors
Dongguan Dalang gallop general machinery Business department Service Hotline
4News

Small door for ironing machine


First, keep the ironing machine clean: Make sure that the ironing machine ironing slot is clean and silver. Any other color may stain clean linen, posing a hidden danger to ironing.
Second, waxing: Most operators often wax the ironing machine too much or too little. Experts say waxing is often, but not enough. Normally, wax every 2-3 hours. If the wax cloth is cold and soft, sprinkle the wax powder; if the wax cloth is hard, do not add wax powder.
Third, neutral pH: keep the pH between 6-7. Low pH causes the linen to roll and scream.
Fourth, observe the ironing speed and paper feed speed: The ironing speed is closely related to the type of linen at the paper feed end. For example, a small piece of linen (such as a mouth piece) can move at a speed of 30 feet / minute (about 9 meters / minute), but it cannot be said that a large piece of linen uses the same speed.
Five, linen moisture and ironing box temperature: The lower the temperature of the ironing box, it means that the water in the linen to be ironed must be less. If the ironer's temperature is only 270oF (132oC) or lower, linen can easily get stuck. The higher the temperature of the ironing box, the smoother the linen is.
6. Drum size: The circumference of the drum should be measured regularly. When the circumference of the roller is below the minimum value of the equipment manufacturer, this means that the productivity of the ironing machine is substantially reduced by 50%.
Seventh, monitor the line speed of the ironing machine: For all ironing machines, the line speed of the ironing machine must be increased (when linen cloth passes through the ironing machine, the speed of the latter roller is always faster than the previous roller). Most older ironing machines have the same speed for all rolls, so the speed of subsequent rolls is usually increased by increasing the thickness of the ironing felt. When ironing polyester linen, line speed is critical. If linen is rubbing, check the thickness of the felt or the speed of the roller.
The above are the ironing machine using tips provided by Dongguan Dalang Junye Washing Equipment Co., Ltd. I hope to help you. In everyday life, our clothes are clean, but in order to better show our own characteristics, the cleanliness of clothes is also important. So-called clothes and saddles are also reasonable.
Home  About Us  Products  Cooperation   News  Information  Contact Us